Copper Dish with Loop #3145-A – Assembly Instructions

You should have the following pieces:

  • Dish with 5/8″ hole
  • Bottom brass piece
  • Top brass piece with loop
  • Thin copper chain

STEP #1 

Insert the bottom brass piece through the hole in the dish, from underneath.

STEP #2

Screw on the top brass piece and tighten, finger tight. You may need to hold the piece underneath so it doesn’t spin.

STEP #3

Twist open the end link of thin copper chain, attach to the brass loop. You can easily do this with your fingers.

STEP #4

Close up the link. 
Adjust the length, using as many links as needed to reach the bottom of your rain chain. 
Enjoy!